Mark Levinson Nº 320S Pre-Amplifier(시연중) > 장터

Specifications
Connector Complement	3 balanced (female XLR) stereo inputs 4 single-ended (Mark Levinson-RCA) stereo inputs 1 balanced (male XLR) stereo main output 1 single-ended (Mark Levinson-RCA) stereo main output 2 single-ended (Mark Levinson-RCA) stereo record outputs 2 8-pin RJ-45 connectors for Link communication 1 6-pin modular RJ-11 connector for RS-232 communication 1 3.5mm mini-jack for trigger output 1 3.5mm mini-jack for IR input 1 phono ground terminal 1 IEX-standard AC mains connector
Crosstalk	less than 90dB (any input to any output, input terminated)
Dimension	width: 17.75" (45.1cm) height: 2.915" (7.4cm) depth: 14.04" (35.7cm)
Frequency Response	10Hz-40kHz: ±0.2dB
Gain	0, 6, 12, or 18dB (line-level stage)
Gain Resolution	1.0dB increments up to 23.0dB on front panel (-57dB) 0.1dB increments above 23.0dB on front panel (-57dB)
Input Impedance	100k
Input Overload	when gain is set to +18dB: 1.6V on XLR, 0.8V on RCA when gain is set to +12dB: 3.3V on XLR, 1.6V on RCA when gain is set to +6dB: 6.6V on XLR, 3.3V on RCA when gain is set to 0dB: 13.2V on XLR, 6.6V on RCA
Operating Voltage	100V, 120V, 220V or 230V AC power at 50 or 60Hz (preset)
Output Impedance	less than 50ohms
Power Consumption	50 watts maximum
Residual No	20Hz to 20kHz, input terminated: less than -94dBV
Shipping Weight	30lb (14kg)
THD + Noise	less than 0.001%
Volume Control Range	80.0dB (maximum)

Fullrange 협찬 BRAND